Author Archives: Rick L.

My Published Designs

Last weekend, I uploaded my three non-reloading related designs to Thingiverse. Check them out here!

The Surefire flashlight mount isn’t my design; it’s a remix of an existing design. The size of the hole for the flashlight was too large, so after downloading the original model I modified the design for my light.  It seems to be the most popular.

All of these designs are shared under the ‘Creative Commons – Attribution – Share Alike’ license, so others can reproduce these with confidence.

facebooktwittergoogle_plusredditpinterestlinkedinmail

Another Useful Print – Picatinny Rail Flashlight Holder

Yes, it’s plastic…  no, I don’t expect it to hold up to extreme use (but you’d be surprised at how solid it is).

25mmFlashlightMount

Without any mounting hardware, it fits tight on the rail and tight on the light.  I picked up the basic design from Thingiverse.com and had to modify the diameter of the hole to fit my Surefire light.  It’s perfect for my basic needs.

What I don’t know (yet) is how well it will actually work on my AR.  Frankly, I think it will be fine – the light (which isn’t purpose-built as a weapon light) may have more issues than the mount. Based on what I’ve read, I expect the recoil to mess with the on/off of the light based on the spring loaded battery contact and the momentary switch.

facebooktwittergoogle_plusredditpinterestlinkedinmail

Wives & 3d Printers

After being married for 27 years (yes, to the same woman!), I accurately predicted her reaction to my foray into 3D printing.  Skepticism mixed with a small dose of ridicule.  That’s ok – I knew what would happen next as well.

Initially, it’s fair to say she didn’t share my vision for what 3D printing could do – and what it holds for the future.  “It’s just plastic!” (…as I look around a house with pieces of useful plastic in every corner and drawer); “Nothing you’re printing is useful!” (as her iPhone charges in its iChair!).  I printed some other knickknacks and left them for her without saying much – knowing that the day would come when the light bulb began to flicker.

I try to surf yeggi.com and Thingiverse.com regularly, and one day I came across a Fingernail Painting Grip Board.  FingernailThingiverseNow, although don’t paint my fingernails, I could see the potential in this little widget.  So, I printed one and left it for my wife.  She asked about it, and then seemed to dismiss it.  It went unused for several weeks.

Then, it happened.  She asked how much it costs to print this marvelous little token of plastic… “Oh, about 40 cents I suppose”.  Then she asked how long it takes to print one (about 45 minutes).  Then… the request:  “Would you mind printing 20 of those for me to give to my friends?”.  BAM!  There we go!  In between other stuff I print, I’m running them off, two at a time.  Once, I caught her standing there watching them print – mesmerized – much like I was for the first few days.

So, if know any members of the Korean American Women’s Association here in Vegas, don’t tell them…  but as an elf with a little insider knowledge, I’m betting each of them is going to get one of these pretty soon.  She asked what it would take to make one for painting toenails… it seems not everything is on Thingiverse, so this one will have to be designed in-house.  I wonder what her aptitude for learning CAD is (wait, don’t answer that – I already know).

Fingernail_thing

facebooktwittergoogle_plusredditpinterestlinkedinmail

Crickets

Crickets chirping…  that’s (unfortunately) what it’s sounded like here at reloadingcreations.com for about the past month.  I’ve worked through some health issues during that time and (I think, hope, pray…) we’re past that.  I’ve said that a few times over the past weeks, and apparently haven’t knocked on wood.  Anyway…

I’m glad I got the framework for this site built out and had the basics up & running ahead of all the personal drama.  Despite not keeping up with the blog here, or updating posts on other forums, I’ve had several orders that I’ve filled for folks who came across the info.  It was nice to be prepared in the sense of having the files ready to go and a process built, so that when the orders came in it wasn’t a mad rush to handle them.

So, (‘knock on wood’) I’m back.

facebooktwittergoogle_plusredditpinterestlinkedinmail

So… What Have I Printed?

Since I got this printer on 9-3-2013, it’s been used for over 238 hours of printing (that’s over 9 hours a day of printing!).  So, what have I printed?

Decap_OldandBolt

Successful prints:  These either worked as expected the first time (about half of them) or required several iterations to get them ‘done’.

  • Pen & pencil holder (downloaded from Thingiverse)
  • Rifle scope zoom rings (that I designed)
  • 3 versions of RCBS decap / primer catchers (Thingiverse / revisions by Lon)
  • Derim cup (that I designed)
  • Piston, rings and rod (downloaded from Thingiverse)
  • Core swaging catch tray (that I designed)
  • Bleed tray (that I designed)
  • Core shaker (that I designed based on another’s work)
  • Customized iPhone cases (downloaded from Thingiverse & modified)
  • Ford V6 engine block (downloaded from Thingiverse)
  • Clips to mount plexiglass to the printer frame (that I designed)
  • Model railroad track clips (downloaded from Thingiverse)
  • Proof of concept for brass sorting (that I designed)
  • Reloading die holder (that I designed)
  • Lego-style pieces (downloaded from Thingiverse)
  • A plastic bullet (that I designed)

Works in progress:  These still require some work…  either I need to modify the design (the die plate holder), or the model is complex and requires a more advanced approach to printing.

  • Model windmill (downloaded from Thingiverse)
  • Reloading die plate holder (that I designed)

Several of these were just for fun – to see what the printer would do.  Most, though, solved specific problems.  Would I have spent money on equivalent commercial products?  Probably not for many of them.  In many situations, the equivalent products cost more than I was willing to pay (I know…  so I bought a 3D printer instead).  However, some are invaluable – and others are interested in purchasing them.  In any event, I’m still blown away by the technology & the possibilities – I’m turning bits into useful objects right here on my desk!

facebooktwittergoogle_plusredditpinterestlinkedinmail

Printing Cool Stuff

Sometimes you have to print stuff – just because you can!

Ford_V6-2Ford_V6-3

This is a Ford V6 engine block, uploaded to Thingiverse by engineers at Ford.  It was ‘simplified’ by another Thingiverse user to ease the burden on computers that have to crunch all of the slices.  I’m amazed at the detail!  It took about 7 1/2 hours to print.  All I need now are pistons, crankshaft, cam…

 

facebooktwittergoogle_plusredditpinterestlinkedinmail

Printing, posting and proofing

Just a few days ago, I took the leap.  So far, so good!  I’ve had what I consider good interest, and I’m working on filling orders.  Not every ‘order’, though, is for reloading / swaging accessories.  Friends learn about the printer and their minds go into high gear…  I just printed 52 .027 gauge train track connectors!

The good?  Things are running relatively smoothly.  The printer is running great – glad it doesn’t need sleep because it’s not getting any.  I’ve built process around my activities.  The processes include having a Google Docs spreadsheet where I’m tracking orders & milestones; part of that spreadsheet is posted publicly and linked to the site so customers know where their order stands.  I’m also scheduling print jobs to maximize output (Google Calendar) – some jobs run longer than others, and I need to be here to take them off the build plate before the next job can start.  I’ve stayed current on e-mail, private messages and posts on the relevant forums. I’ve had a chance to catch my breath, go back and make sure my i’s are dotted and T’s crossed – fixing a couple of typos here and there on the blog.  I think I’m in a good spot at the moment.

The bad?  Not enough time in the day to learn more.  Lon has pointed me to many things that I still need to learn & explore – settings for the slicing software, tweaks to settings and other things to try.  Things are settling down after the initial push, so I hope to have time soon to dive into those things. I don’t want selling a few things to overshadow the fun of learning & exploring this new technology.

Gotta run – Google Calendar is reminding me that it’s about time to swap out another piece! And, off to work!

facebooktwittergoogle_plusredditpinterestlinkedinmail

Speed to Market – Transformational Technology

After about 3 weeks with my printer, I’ve decided to take the leap and offer 3D printed objects for sale.  To be sure, it’s a bit of a leap of faith – I’ve gone from “hobby & home use” to taking orders in that period of time, with no previous 3D printing experience.

One of the interesting aspects of this is demonstrating how this technology can truly revolutionize ‘speed to market’.  When I got the printer, I had a couple of ideas for products that would serve a niche market… In the week between ordering the printer and receiving it, I quickly evaluated and then learned (just the basics) of a CAD program.  I spent several days of that first week designing several of my ideas, turning them from thoughts to bits.  Then, over the next 19 days (which included a 4 day business trip), I was able to learn the basics of printing, iterate through several design changes on each of the items I’d drawn, send them for testing and offer them for sale. In less than 3 weeks.  That’s transformational technology! In that same time period, I’ve come to know (virtually) a couple of people – Lon in particular – who have provided timely advice that’s minimized my learning curve and kept things that could have derailed on track.  That highlights another key aspect of the technology curve – how the internet is central to enabling this journey.  I’m pointing out the obvious now, but with a reason – I remember a few short years ago when this would have been impossible. Even IF I had a 3D printer then, my ‘market’ would have been folks I could reach through classified ads in specialty magazines delivered by the postman.

WIll it be successful?  Can the printer (and can I) deliver on the expectations I’ve set?  Time will tell.  To be sure, there are some risks.  But, I’m also taking a measured approach – this isn’t an endeavor where I’ve taken out ad space on a major site and shouted from the mountaintops…  I’ve identified a narrowly focused niche market (that I’m part of) and provided small solutions to every day problems.

There are a couple points of potential failure that need to be considered.  Will the (relatively) unproven printer be up to the task?  What if demand exceeds my capacity?  Will I ever sleep?We’ll know soon. I’m writing this in the hours before openly announcing product availability on a forum. I’ve hinted at offering them for sale – and my latest post on one forum generated significant interest… and there is a line forming.  Wow.

So, here we go!  With the encouragement and support of several key people, I’m off!

facebooktwittergoogle_plusredditpinterestlinkedinmail